Shoof

The Milk Test Paddle is used as part of the California Milk Test (CMT) to detect cases of sub clinical mastitis in cattle. The Milk Test Paddle is divided into four wells, when this is used in combination with the CMT Fluid it is easy to detect infections and be able to narrow it down to which udder is infected.

These high quality Sweetmat disinfection mats are used at entrances to disease-sensitive areas and establishments. These mats feature a permeable upper-fabric which enables disinfection of footwear, or anything else crossing it (dogs, vehicles, etc.). Bottom and sides are of non permeable material to prevent leakage or leaching of disinfection solution. Simply pour solution on top of mat to fill: 85 x 60 holds 8 litres. All mats are 3cm thick, with a core of bonded urethane foam. To clean, place on edge and hose off. Leave to drain.

These high quality Sweetmat disinfection mats are used at entrances to disease-sensitive areas and establishments. These mats feature a permeable upper-fabric which enables disinfection of footwear, or anything else crossing it (dogs, vehicles, etc.). Bottom and sides are of non permeable material to prevent leakage or leaching of disinfection solution. Simply pour solution on top of mat to fill: 85 x 85 holds. All mats are 3cm thick, with a core of bonded urethane foam. Toclean, place on edge and hose off. Leave to drain.

Tailwell tail trimmer sharpening paste for easy and simple grinding of the blades.

5grms

Optional lubricant for the Tail Trimmer Tailwell®.Regular and frequent lubrication of the cutters is very important. The oil has been formulated specially for this purpose. It is a non-throw, non-dust-gathering light oil which will not clog the cutters. We strongly recommend continued use of this lubricant. Lubricant should be used sparingly but frequently on the cutter tips - every 30-40 tails (or more frequently with sand contamination).

Optional lubricant for the Tail Trimmer Tailwell®.Regular and frequent lubrication of the cutters is very important. The oil has been formulated specially for this purpose. It is a non-throw, non-dust-gathering light oil which will not clog the cutters. We strongly recommend continued use of this lubricant. Lubricant should be used sparingly but frequently on the cutter tips - every 30-40 tails (or more frequently with sand contamination).