Parlour

AseptoCool is a chlorinated low foaming caustic liquid circulation cleaner. Applied correctly, AseptoCool prevents the formation of water scale on your milking equipment. Unlike many similar products, AseptoCool is phosphate free. A chlorinated product, AseptoCool has boosted cleaning properties and promises you pristine equipment between milking sessions. Application of AseptoCool: Pre-clean with water. Then clean with AseptoCool 1.0% (at room temperature, 10 min.) or 0.7% (at 70°C; 10 min.). Rinse with water of excellent drinking quality. AseptoCool should be used 12 to 13 times a week - in rotation with HorolithCool once or twice a week.

AseptoCool is a chlorinated low foaming caustic liquid circulation cleaner. Applied correctly, AseptoCool prevents the formation of water scale on your milking equipment. Unlike many similar products, AseptoCool is phosphate free. A chlorinated product, AseptoCool has boosted cleaning properties and promises you pristine equipment between milking sessions. Application of AseptoCool: Pre-clean with water. Then clean with AseptoCool 1.0% (at room temperature, 10 min.) or 0.7% (at 70°C; 10 min.). Rinse with water of excellent drinking quality. AseptoCool should be used 12 to 13 times a week - in rotation with HorolithCool once or twice a week.

AseptoPowder is a powerful alkaline cleaner. It is designed for milking equipment and milk tanks. A chlorine free product from the Ecolab range, AseptoPowder can be used for cold or hot circulation cleaning. AseptoPowder has been formulated specially for use in hard water. Use AseptoPowder for best hygiene and spotlessly clean milking equipment. Application of AseptoPowder: Pre-clean your equipment with water. Then, clean thoroughly with your AseptoPowder solution at a concentration of 0.5% (minimum 10 min. at 40°C - 50°C). Once cleaning is complete, rinse with water of good drinking quality. Please note that AseptoPowder should be used in rotation with HorolithPowder.

AseptoPowder is a powerful alkaline cleaner. It is designed for milking equipment and milk tanks. A chlorine free product from the Ecolab range, AseptoPowder can be used for cold or hot circulation cleaning. AseptoPowder has been formulated specially for use in hard water. Use AseptoPowder for best hygiene and spotlessly clean milking equipment. Application of AseptoPowder: Pre-clean your equipment with water. Then, clean thoroughly with your AseptoPowder solution at a concentration of 0.5% (minimum 10 min. at 40°C - 50°C). Once cleaning is complete, rinse with water of good drinking quality. Please note that AseptoPowder should be used in rotation with HorolithPowder.

DAILY ROUTINE AFTER MILKING: Wash outside of clusters as usual and place on jetters. Rinse plant with 9 litres of cold water per unit. Dissolve Hydrosan Plus in cold water at the rate of 227g to 45 litres. Allow 9 litres of solution per unit. Draw the solution into the plant, allowing the first 4.5 litres to run to waste and circulate the remainder for 10 minutes. Return the solution to the wash trough for second daily routine. Do not rinse plant until immediately before next milking. The detergent will dissolve readily by adding it slowly, whilst stirring, to the trough containing 4.5 litres of water then topping up to the correct volume. Dissolving Hydrosan Plus in less than 4.5 litres is not advised. BEFORE MILKING: Rinse plant with 9 litres of cold water per cluster to remove the Hydrosan Plus solution. HOT WASH ROUTINE: Flush the plant thoroughly with 13.5 litres of cold water per unit. Dissolve Hydrosan Hot Shot Sachets in hot water (80˚C) at a rate of one sachet per 45 litres of water. Circulate the solution for 10 minutes and then flush with 13.5 litres of cold water per unit. DESCALING: (Once per fortnight or whenever deposits are evident). Circulate 0.55 litres Descale Liquid or 454g Descale P per 45 litres of cold/hot water for 5 to 10 minutes. Flush plant thoroughly with 13.5 litres of cold water per unit. Immediately follow with the hot wash routine described above.

A heavy duty cleaner for drains and milking utensils.

Multi-Purpose Cleaner & Salt Remover Specially formulated to wash all surfaces of salt and dirt. Maximum performance yet is safe to the environment. For use in pressure washers and hand washing application

Citric Acid is a weak carboxylic acid and a naturally occurring fruit acid. It is the most widely used organic acidulate across all industries due to its wide range of uses including a non-corrosive descaler in many applications.

Citric Acid is a weak carboxylic acid and a naturally occurring fruit acid. It is the most widely used organic acidulate across all industries due to its wide range of uses including a non-corrosive descaler in many applications.

Used to control where necessary exsesive foam in the wash section.

HorolithCool is a low foaming, powerful acidic detergent descaler for milking equipment. HorolithCool is highly effective at removing inorganic scale deposits, including calcium oxalate. HorolithCool is low foaming and suitable for use in applications under conditions of high pressure and turbulence. HorolithCool is highly economical in use concentrations. HorolithCool is a conductive liquid detergent. It has effective cleaning properties in both hot and cold washes, and in hard or soft water. Application of HorolithCool: Pre-clean equipment with water. Then clean with HorolithCool 1.0% solution (at room temperature for 10 mins.) or 0.7% (at 70°C for 10 mins.).After cleaning with HorolithCool solution, rinse with water of drinking quality. HorolithCool should be used once or twice a week in rotation with AseptoCool.

HorolithCool is a low foaming, powerful acidic detergent descaler for milking equipment. HorolithCool is highly effective at removing inorganic scale deposits, including calcium oxalate. HorolithCool is low foaming and suitable for use in applications under conditions of high pressure and turbulence. HorolithCool is highly economical in use concentrations. HorolithCool is a conductive liquid detergent. It has effective cleaning properties in both hot and cold washes, and in hard or soft water. Application of HorolithCool: Pre-clean equipment with water. Then clean with HorolithCool 1.0% solution (at room temperature for 10 mins.) or 0.7% (at 70°C for 10 mins.).After cleaning with HorolithCool solution, rinse with water of drinking quality. HorolithCool should be used once or twice a week in rotation with AseptoCool.