Insulators

These are good quality insulators that screw into wooden fence posts and will hold tape up to 40mm wide or rope up to 6mm diameter. Both 20mm & 40mm tape can be used and slot into the top of the insulator, the tongue is then pressed shut and clipped over at the top to hold the tape securely in place. Alternatively, rope can be used through the guide hole for rope or twine, these insulators will take rope up to approx. 6mm and again the clip just locks the insulator closed at the top to hold the rope in place. The thread on the insulator's screw also has a notch cut out of it making it easier for it to bite into the wood when being screwed in place. Ideally suited for most tape fences and the main advantage over insulators that hold tape loosely is that should the tape break for any reason then the remaining tape will not flap around destroying itself. The fence line will still be in position apart from the area which has broken.

Screw In Insulators are made with highly durable polyethylene plastic and a metal screw. They are very simple to use. Simply screw the insulators into a wooden post and string your electric wire, rope or tape through to create an effective fence.

Screw In Insulators are made with highly durable polyethylene plastic and a metal screw. They are very simple to use. Simply screw the insulators into a wooden post and string your electric wire, rope or tape through to create an effective fence.

Screw In Insulators are made with highly durable polyethylene plastic and a metal screw. They are very simple to use. Simply screw the insulators into a wooden post and string your electric wire, rope or tape through to create an effective fence.

Screw In Insulators are made with highly durable polyethylene plastic and a metal screw. They are very simple to use. Simply screw the insulators into a wooden post and string your electric wire, rope or tape through to create an effective fence.

The Insulator Staple is a galvanised staple suitable for all types of electric fencing wires. The staple clamps around the wire after the wire has been laid out. It hold the wire strongly and protects the risk of shorting. The insulation on the staple protects from UV rays and increases the life of the staple.

These bolt insulators have a single bracket with a buckle and allow all electric fencing tapes up to 40mm wide to be secured and tightened at the start amd end of the fence line. Just weave the tape through the bracket then back on itself going through the buckle and the poly tape will will be held firmly in place. This provides a secure anchor point at the start of a fence line and also allows you to tension the fence and to adjust as necessary should the fence become slack over time. Durable electroplated steel bolt & buckle - suitable for 20mm and 40mm tape.