Filters

3M™ Particulate Filter 2135 is our replacement filter for 3M reusable masks in 6000 and 7000 series. They provide P3 protection against high level fine dusts and oil or water based mists and contain no natural rubber latex components. • Replacement filters for insulation, wall and ceiling repairs, flooring and manual sanding • P3 protection against high level fine dusts and oil or water based mists* • Use with 3M reusable masks in 6000, 6500 and 7000 series • Tested and approved to comply with European standards - CE Mark 0086 (EN 143:2000 P3 R) • Users must be trained and have read all user instructions. Misuse may cause injury, severe or life threatening illness • No natural rubber latex components • Pack contents: 1 pair of filters • Compatible with 3M Eyewear and Hearing Protection • *This product when used as a complete system, helps protect against certain contaminants

3M™ Pre Filter Retainer to keep the 3M™ Filters 5911, 5925, & 5935 in place at the front of the respirator, for use on the 3M™ Particulate Filters 5000 Series and 3M™ Cartridges 6000 Series. Can be used with 3M™ Filters 5000 Series to add particulate protection to the gas and vapour filters. Features and Benefits • 3M™ Pre Filter Retainer to clamp the 3M™ Filters 5911, 5925, & 5935 in place at the front of the respirator • For use on the 3M™ Particulate Filters 5000 Series and 3M™ Cartridges 6000 Series • Can be used with 3M™ Filters 5000 Series to add particulate protection to the gas and vapour filters • Easy to snap into position over the filter Pack of 2

The 3M™ 6055 (A2) is a filter pack, which is designed for use with the 6000/7500 series half face respirators and 6000/7000 series full face respirators. They provide the user with a high protection from contaminated environments in a wide range of industrial contaminants. With a filter type of A1, it can protect you against organic gases. The bayonet fitting types allows each filter to be clicked in place for ease. Features and Benefits Gas and Vapour Filter 6055 offers A2 protection against organic vapours (boiling point above 65%) Lightweight, low breathing resistance, well balanced when fitted to mask Provides excellent field of vision as a result of the unique trapezoidal shape Filters can be used on all 3M™ Half and Full Face Masks fitted with a bayonet connections system Bayonet fitting allows filters to be clicked into place for ease of fitting Applications • Vehicle manufacture • Aircraft manufacture and repair/refurbishment • Boat building • During manufacture and use of inks, dyes, adhesives, resins, varnishes and paints Pack of 2

These 3M™ 6000 Series Gas and Vapour Filters are the 6059 Class ABEK1 filters designed specifically for organic vapours, inorganic and acid gases and ammonia. The 6059 ABEK1 gas and vapour filter employ a counter-balanced, streamlined design to minimise the feeling of weight and therefore improve comfort. The positioning of the filters ensures an excellent field of vision. Features and Benefits • Gas and Vapour Filter 6059 offers ABEK1 protection against organic vapours (boiling point above 65%) inorganic vapours, acid gases, ammonia and its derivatives • Lightweight, low breathing resistance, well balanced when fitted to mask • Provides excellent field of vision as a result of the unique trapezoidal shape • Filters can be used on all 3M™ Half and Full Face Masks fitted with a bayonet connections system • Bayonet fitting allows filters to be clicked into place for ease of fitting • Type 5 - Hazardous Particulate Protection - EN ISO 13982 • Type 6 - Liquid Splash Protection - EN 13034 +A1m chemicals, and can be flame retardant Pack of 2

The 3M™ 6075 is a filter pack, which is designed for use with the 6000/7500 series half face respirators and 6000/7000 series full face masks. They provide the user with a high protection from contaminated environments in a wide range of industrial contaminants. With a filter type of A1, it can protect you against organic vapours. The bayonet fitting types allows each filter to be clicked in place for ease. Features and Benefits Gas and Vapour Filter 6075 offers A1 protection against organic vapours (boiling point above 65%) and formaldehyde up to 10 ppm Lightweight, low breathing resistance, well balanced when fitted to mask Provides excellent field of vision as a result of the unique trapezoidal shape Filters can be used on all 3M™ Half and Full Face Masks fitted with a bayonet connections system Bayonet fitting allows filters to be clicked into place for ease of fitting Pack of 2

The 3M™ 6099 protects against organic vapours (boiling point above 65°C, inorganic vapours, acid gases, ammonia and its derivatives, mercury, formaldehyde up to 10ppm and particulates. Suitable for use with 3M™ Reusable Full Face Respirators featuring the Bayonet filter connection system: 3M™ Reusable Full Face Mask 7097S, 3M™ Reusable Full Face Masks 6000 Series. When working in environments with contaminants, or where hazardous gases, vapour or particulates are a potential problem, the range of 3M respirator masks and filters have a PPE solution that gives you the protection you need. Features and Benefits • Gas, Vapour and Particulate Filter 6099 protects against gases, vapours and particulates • Suitable for use with 3M™ Reusable Full Face Respirators featuring the Bayonet filter connection system: 3M™ Reusable Full Face Mask 7097S, 3M™ Reusable Full Face Masks 6000 Series • Bayonet fitting allows filters to be twisted and clicked into place for ease of fitting Applications Filtered respirator facemasks are essential PPE for environments where particle ingress can be potentially hazardous to your health, such as gas, vapours or dust. They are often more suitable for heavy-duty tasks than disposable facemasks. Replaceable respirator particulate filters are graded in different ways to indicate their suitability for different applications, such as; • A- Organic vapours with a boiling point more than 65°C • B- Inorganic vapours • E- Acid gases • K- Ammonia and ammonia derivatives • AX- Organic vapours with a boiling point less than 65°C Pack of 2

The 3M™ 2125 is a soft, lightweight filter pack, which is designed for use with the 6000/7500 series half face respirators and 6000/7500 series full face respirators. They provide the user with a high protection from contaminated environments in a wide range of industrial contaminants. With a filter type of P2, it can protect you against solid and liquid particles with effective filtration efficiency. The bayonet fitting types allows each filter to be clicked in place for ease. Features and Benefits • 3M™ Particulate Filters 2125 offer P2 R protection against solid and liquid particles • Suitable for use with 3M™ all 3M™ Reusable Half and Full Face Masks featuring the Bayonet Filter Connection System • Bayonet fitting allows filters to be clicked into place for ease of fitting Pack of 2

3M 5935 P3 Particulate Filters offer flexible protection against a wide range of solid and liquid particles. For example, they are effective against fine dust, pharmaceutical powders, aerosols and asbestos. The filters are designed so they don’t obstruct your field of view. They are lightweight, easy fit and above all reliable. The filters can be used with any 3M half or full face masks that have a bayonet style filter connection. P3 – protects against harmful or carcinogenic dusts, water and oil based mists or aerosols and biological agents of risk groups 2 and 3 in concentrations of up to 20 x WEL. R – reusable. The filter can be used for longer than one shift and fulfils the 120 mg loading test with solids and liquid aerosols. The 3M 5935 Particulate Filters are available now at Safety Supplies. Call our friendly team today for further details and expert advice on all of our PPE and respiratory protection products.