Products tagged with 'fencing'

A 9v battery powered energiser suitable up to 3km. Two modes of operation: high power and battery conserving. Comes with earth stake and leads. 3 year warranty.

Battery not included

These are good quality insulators that screw into wooden fence posts and will hold tape up to 40mm wide or rope up to 6mm diameter. Both 20mm & 40mm tape can be used and slot into the top of the insulator, the tongue is then pressed shut and clipped over at the top to hold the tape securely in place. Alternatively, rope can be used through the guide hole for rope or twine, these insulators will take rope up to approx. 6mm and again the clip just locks the insulator closed at the top to hold the rope in place. The thread on the insulator's screw also has a notch cut out of it making it easier for it to bite into the wood when being screwed in place.

Ideally suited for most tape fences and the main advantage over insulators that hold tape loosely is that should the tape break for any reason then the remaining tape will not flap around destroying itself. The fence line will still be in position apart from the area which has broken.

These tape insulators will hold either 20mm or 40mm electric fence tapes around 7-8 inches away from the fence post when in position and the unique head will hold your tape without crushing it. The tape is held in position within the insulator by a tongue which holds the polytape firm without damaging either the tape's structure or the conducting lines.

These distance insulators are for electric fencing wire, twine & rope up to 12cm diameter. They have a 20cm long support allowing them to be offset from the fence posts

These are distance insulators that screw into wooden fence posts and will hold rope or wire around 8 in / 20cm away from the post. Mostly used for horse electric fences they also make excellent perimeter insulators for poultry pens to stop foxes from climbing over the top.

The Stainless Steel Polytape Connectors is the ideal tool for connecting stranded tapes wide and is a straight forward solution for repairing torn tapes. The two lines of metal of the Tape Connector holds the tape in place and once tightened, the current will pass through the stainless steel connector. The Stainless Steel Polytape Connector will avoid the need to twist the tape and will ensure better electric connection than tying the tape together.