Electric Fencing

The Electric Poultry Netting is a quality orange netting fence suitable for all types of poultry farms. It provides an effective protection against predators with the help of integral secured posts. It is quite easy to move and maintain even for the novice small holder. Electrify the Electric Poultry Netting with a small energiser, at about 5000 volts Features of Electric Poultry Netting Contains 12 horizontal polywire strands, upper 11 are electrified for maximum effect Suitable for temporary or semi-permanent fencing Close mesh configuration, durable & lightweight

Suitable for fencers up tp 0.3j.

Electric fence for rabbits (portable) to keep them out of veggies and from around trees. The netting is 65cm high in 50m kits with legs built in. Easy to put it up, take it down or move it around.

The Ratchet Strainer with Insulator is a permanent wire tensioner used for tightening or loosening ropes or poly wires. The strainer has a smooth spring clip design for maintaining tension and joining fencing wires. They are strong and easy to use with all types of fencing applications.

Plastic reel with pre-loaded fenceman 12.5mm x 300m tape.

Plastic insulator designed specifically for Electric Fencing Wire. Protects wooden fencing from livestock breach/chewing and enable paddocks to be electrified without the need for expensive Polyposts. Simply nail into pre-existing fence posts and string with wire to create a circuit.

A galvanised rope connector used in an electric fencing system. It is easy to use and can be mounted using a screwdriver. It is rust free and reduces the chance of live wire breakage.

Suitable for fencers up to 0.5j.

Unlike alkaline batteries saline batteries gradullay lose voltage over time until they are empty. Suitable for fencers up to 0.8j.

Unlike alkaline batteries saline batteries gradullay lose voltage over time until they are empty. Suitable for fencers up to 0.8j.

These are good quality insulators that screw into wooden fence posts and will hold tape up to 40mm wide or rope up to 6mm diameter. Both 20mm & 40mm tape can be used and slot into the top of the insulator, the tongue is then pressed shut and clipped over at the top to hold the tape securely in place. Alternatively, rope can be used through the guide hole for rope or twine, these insulators will take rope up to approx. 6mm and again the clip just locks the insulator closed at the top to hold the rope in place. The thread on the insulator's screw also has a notch cut out of it making it easier for it to bite into the wood when being screwed in place. Ideally suited for most tape fences and the main advantage over insulators that hold tape loosely is that should the tape break for any reason then the remaining tape will not flap around destroying itself. The fence line will still be in position apart from the area which has broken.

Screw In Insulators are made with highly durable polyethylene plastic and a metal screw. They are very simple to use. Simply screw the insulators into a wooden post and string your electric wire, rope or tape through to create an effective fence.