Clipping & Grooming

The professional grinding machine for re-sharpening all types of cutters and combs. Can be used in vertical or horizontal position. Mains operated, smooth running and free of vibrations. Complete with 1kg of special grinding paste and cutter comb holder. Grinding disc 350mm.

Very fine cutter and comb set for very close clipping. Ideal for use prior to surgery

Leaves 0.5mm hair.

An effective metal comb used for cattle. It features strong plastic handle with seven rows of teeth for maximum combing. It helps you to get through the thickest types hair with its metal teeth. It helps to get rid of dirt caught under the hair and ensures the animal remains comfortable during the grooming process.

An effective comb used for cattle and horses. It features strong wooden handle with fine teeth on one side. It helps you to get through the thickest types hair with its metal teeth. It helps to get rid off dirt caught under the hair and ensures the animal remains comfortable during the grooming process.

Stainless steel curved blade. 7". Comes pre-packed on card

Tailwell tail trimmer sharpening paste for easy and simple grinding of the blades.

5grms

Optional lubricant for the Tail Trimmer Tailwell®.Regular and frequent lubrication of the cutters is very important. The oil has been formulated specially for this purpose. It is a non-throw, non-dust-gathering light oil which will not clog the cutters. We strongly recommend continued use of this lubricant. Lubricant should be used sparingly but frequently on the cutter tips - every 30-40 tails (or more frequently with sand contamination).

Optional lubricant for the Tail Trimmer Tailwell®.Regular and frequent lubrication of the cutters is very important. The oil has been formulated specially for this purpose. It is a non-throw, non-dust-gathering light oil which will not clog the cutters. We strongly recommend continued use of this lubricant. Lubricant should be used sparingly but frequently on the cutter tips - every 30-40 tails (or more frequently with sand contamination).

This unique device has been developed to simplify the tedious job of trimming tails of milking cows. Tail trimming is carried out to reduce faecal and urine contamination of the milker, and to reduce dirt around the rear quarters and udder of the cow. It is recommended that tail trimming is carried out about twice a year to ensure milker safety and highest milk quality. The TailWell Tail Trimmer is secured by way of the chuck shank into any suitable cordless drill of 14 volts or better, and producing approx. 1,000rpm. It is quiet in use, with a smooth and fast cutting action. Trimming takes only 3-4 seconds per tail, and is easily accomplished during milking. The outer blade oscillates over a fixed inner blade, so there is no risk of injury to man or cow. A neck strap is incorporated so the device can be hands-free between cows. Replacement blade sets are available. Lubrication is applied to the blades at the start of operation, and should be re-applied each 80-100 tails. Pre-cutting of the tail switch is not necessary, even if it is very dirty.

Replacement sleeve & cord for Shoof Tail Trimmer.

Key features of the Drill Sleeve and Cord for the Tail Trimmer Drill Attachment:
Replacement part
High quality materials
Strong and durable

Replacement cutter set for Tailwell MK2

Tailwell has only three moving parts. Of these, only one - the self-lubricating sliding-block Rotator Bearing - is subject to any wear.

Pack contains two replacement parts