Bits & Accessories

The tongue port bar gives the horse‘s tongue enough room because of the flattened area on the port. Many horses respond to this with improved suppleness and increased chewing. And yet this bit is also well suited to horses that play with their tongues, trying to put the tongue over the bit, as the port effectively prevents this. Therefore this bit is eminently suitable for horses that do not tolerate pressure on the tongue from conventionally shaped bits and react with head-tossing and the like. The loose ring means a greater mobility of the bit in the mouth. The slight doming means the bit sits perfectly in the mouth. Pressure on the rein alters the angle of the mouthpiece in the mouth and, as a result of its special shape, increases the effect on the bars of the lower jar and tongue. The shaped transition from the mouthpiece to the bit rings prevents pinching and also provides the bit with stability and hold. The shape of the bit is particularly suited to working with young horses. Height of tongue port: 30mm Thickness of bit: 18mm

This ported bar has an especially flattened port design. This gives the tongue optimum room. Many horses respond to this with more suppleness and increased chewing. This bit is also well suited to horses that play with their tongues, trying to put their tongue over the bit, as the port prevents this effectively. Therefore this bit is eminently suited to horses that don’t like conventionally shaped bits due to the pressure on the tongue and respond with head-shaking or similar. The full cheek bit sits very quietly and is very stable in the mouth. It provides reliable lateral restriction without the risk of the skin or lips being pinched by the supports. Useful on horses that clearly need more support and guidance around turns, like young and inexperienced ones or very strong ones. The full cheek bit is very popular with show jumpers for turning quickly. Height of tongue port: 30mm Thickness of bit: 18mm

This ported bar has an especially flattened port design. This gives the tongue optimum room. Many horses respond to this with more suppleness and increased chewing. This bit is also well suited to horses that play with their tongues, trying to put their tongue over the bit, as the port prevents this effectively. Therefore this bit is eminently suited to horses that don’t like conventionally shaped bits due to the pressure on the tongue and respond with head-shaking or similar. The full cheek bit sits very quietly and is very stable in the mouth. It provides reliable lateral restriction without the risk of the skin or lips being pinched by the supports. Useful on horses that clearly need more support and guidance around turns, like young and inexperienced ones or very strong ones. The full cheek bit is very popular with show jumpers for turning quickly. Height of tongue port: 30mm Thickness of bit: 18mm

This ported bar has an especially flattened port design. This gives the tongue optimum room. Many horses respond to this with more suppleness and increased chewing. This bit is also well suited to horses that play with their tongues, trying to put their tongue over the bit, as the port prevents this effectively. Therefore this bit is eminently suited to horses that don’t like conventionally shaped bits due to the pressure on the tongue and respond with head-shaking or similar. The full cheek bit sits very quietly and is very stable in the mouth. It provides reliable lateral restriction without the risk of the skin or lips being pinched by the supports. Useful on horses that clearly need more support and guidance around turns, like young and inexperienced ones or very strong ones. The full cheek bit is very popular with show jumpers for turning quickly. Height of tongue port: 30mm Thickness of bit: 18mm

This ported bar has an especially flattened port design. This gives the tongue optimum room. Many horses respond to this with more suppleness and increased chewing. This bit is also well suited to horses that play with their tongues, trying to put their tongue over the bit, as the port prevents this effectively. Therefore this bit is eminently suited to horses that don’t like conventionally shaped bits due to the pressure on the tongue and respond with head-shaking or similar. The full cheek bit sits very quietly and is very stable in the mouth. It provides reliable lateral restriction without the risk of the skin or lips being pinched by the supports. Useful on horses that clearly need more support and guidance around turns, like young and inexperienced ones or very strong ones. The full cheek bit is very popular with show jumpers for turning quickly. Height of tongue port: 30mm Thickness of bit: 18mm

This ported bar has an especially flattened port design. This gives the tongue optimum room. Many horses respond to this with more suppleness and increased chewing. This bit is also well suited to horses that play with their tongues, trying to put their tongue over the bit, as the port prevents this effectively. Therefore this bit is eminently suited to horses that don’t like conventionally shaped bits due to the pressure on the tongue and respond with head-shaking or similar. The full cheek bit sits very quietly and is very stable in the mouth. It provides reliable lateral restriction without the risk of the skin or lips being pinched by the angled supports. Useful on horses that need more support and guidance around turns, like young and inexperienced ones or very strong ones. The full cheek bit is very popular with show jumpers for turning quickly. The increased pressure from using the second rein on the gag bit causes the bit to tilt and be pulled upwards in the mouth. This results in a stronger effect. Very useful with horses that tend to lean on the bit. Likewise, also used on horses to achieve increased elevation. Height of tongue port: 30mm Thickness of bit: 18mm

This ported bar has an especially flattened port design. This gives the tongue optimum room. Many horses respond to this with more suppleness and increased chewing. This bit is also well suited to horses that play with their tongues, trying to put their tongue over the bit, as the port prevents this effectively. Therefore this bit is eminently suited to horses that don’t like conventionally shaped bits due to the pressure on the tongue and respond with head-shaking or similar. The full cheek bit sits very quietly and is very stable in the mouth. It provides reliable lateral restriction without the risk of the skin or lips being pinched by the angled supports. Useful on horses that need more support and guidance around turns, like young and inexperienced ones or very strong ones. The full cheek bit is very popular with show jumpers for turning quickly. The increased pressure from using the second rein on the gag bit causes the bit to tilt and be pulled upwards in the mouth. This results in a stronger effect. Very useful with horses that tend to lean on the bit. Likewise, also used on horses to achieve increased elevation. Height of tongue port: 30mm Thickness of bit: 18mm

This ported bar has an especially flattened port design. This gives the tongue optimum room. Many horses respond to this with more suppleness and increased chewing. This bit is also well suited to horses that play with their tongues, trying to put their tongue over the bit, as the port prevents this effectively. Therefore this bit is eminently suited to horses that don’t like conventionally shaped bits due to the pressure on the tongue and respond with head-shaking or similar. The full cheek bit sits very quietly and is very stable in the mouth. It provides reliable lateral restriction without the risk of the skin or lips being pinched by the angled supports. Useful on horses that need more support and guidance around turns, like young and inexperienced ones or very strong ones. The full cheek bit is very popular with show jumpers for turning quickly. The increased pressure from using the second rein on the gag bit causes the bit to tilt and be pulled upwards in the mouth. This results in a stronger effect. Very useful with horses that tend to lean on the bit. Likewise, also used on horses to achieve increased elevation. Height of tongue port: 30mm Thickness of bit: 18mm

This ported bar has an especially flattened port design. This gives the tongue optimum room. Many horses respond to this with more suppleness and increased chewing. This bit is also well suited to horses that play with their tongues, trying to put their tongue over the bit, as the port prevents this effectively. Therefore this bit is eminently suited to horses that don’t like conventionally shaped bits due to the pressure on the tongue and respond with head-shaking or similar. The full cheek bit sits very quietly and is very stable in the mouth. It provides reliable lateral restriction without the risk of the skin or lips being pinched by the angled supports. Useful on horses that need more support and guidance around turns, like young and inexperienced ones or very strong ones. The full cheek bit is very popular with show jumpers for turning quickly. The increased pressure from using the second rein on the gag bit causes the bit to tilt and be pulled upwards in the mouth. This results in a stronger effect. Very useful with horses that tend to lean on the bit. Likewise, also used on horses to achieve increased elevation. Height of tongue port: 30mm Thickness of bit: 18mm

The tongue port bar has an especially flattened shape to the port. This gives the tongue optimum room. Many horses respond to this with improved suppleness and increased chewing. This bit is also very well suited to horses that play with their tongues, trying to get their tongue over the bit, as the port effectively prevents this. This mouthpiece is thus eminently suited to horses that do not tolerate traditionally shaped bits due to the pressure on the tongue and react by head-shaking and the like. The Kimblewick bit is an effective combination of a lever effect on the branches of the horse‘s lower jaw, pressure on the poll and change of position of the bit inside the horse""s mouth. Three different buckling options allow the use of the bit to be fine tuned. The sturdy side pieces of the bit provide a certain ""weight"", which ensures a steadier position in the mouth. Height of tongue port: 30mm Thickness of bit: 18mm

The tongue port bar has an especially flattened shape to the port. This gives the tongue optimum room. Many horses respond to this with improved suppleness and increased chewing. This bit is also very well suited to horses that play with their tongues, trying to get their tongue over the bit, as the port effectively prevents this. This mouthpiece is thus eminently suited to horses that do not tolerate traditionally shaped bits due to the pressure on the tongue and react by head-shaking and the like. The Kimblewick bit is an effective combination of a lever effect on the branches of the horse‘s lower jaw, pressure on the poll and change of position of the bit inside the horse""s mouth. Three different buckling options allow the use of the bit to be fine tuned. The sturdy side pieces of the bit provide a certain ""weight"", which ensures a steadier position in the mouth. Height of tongue port: 30mm Thickness of bit: 18mm

The tongue port bar has an especially flattened shape to the port. This gives the tongue optimum room. Many horses respond to this with improved suppleness and increased chewing. This bit is also very well suited to horses that play with their tongues, trying to get their tongue over the bit, as the port effectively prevents this. This mouthpiece is thus eminently suited to horses that do not tolerate traditionally shaped bits due to the pressure on the tongue and react by head-shaking and the like. The Kimblewick bit is an effective combination of a lever effect on the branches of the horse‘s lower jaw, pressure on the poll and change of position of the bit inside the horse""s mouth. Three different buckling options allow the use of the bit to be fine tuned. The sturdy side pieces of the bit provide a certain ""weight"", which ensures a steadier position in the mouth. Height of tongue port: 30mm Thickness of bit: 18mm